LED T5 Tubes – Type A Replacements for F54T5/HO lamps

by

Replace your High Output Fluorescent T5 lamps with LED

There is now a plug and play replacement solution for your 54W T5 high output fluorescent lamps. Type A LED T5 replacement bulbs utilize the same program start electronic T5HO ballasts that their fluorescent counterparts use, so no rewiring is necessary. The minimal installation time and long life of 50,000 hours results in very low long-term maintenance costs. At over 3100 delivered lumens, LED T5 lamps produce the same light output at half the energy costs (54W Fluorescent to 27W LED). Shatterproof glass coating provides a superior beam angle of 240° and ensures the lamps are suitable for food production environments.

  • Wattage: 27W
  • Replaces: 54W Fluorescent
  • Lumens: 3100+ (ballast-dependent)
  • Voltage: 120-277V
  • Color Temperature: 4000K-5000K
  • Beam Angle: 240°
  • DLC-Rated
  • Warranty: 5 years
  • Rated Hours: 50,000
  • CRI: >83
  • Suitable for use in dry and damp locations
  • Suitable for use in totally enclosed recessed fixtures
  • Not intended for use with emergency exits or for emergency lighting

More information on LED T5 Tubes can be found on our shop.

Maxlite's Direct Fit LED T5 Replacement

5 thoughts on “LED T5 Tubes – Type A Replacements for F54T5/HO lamps”

  1. So! Is the T5 LED tubes – Type A are just a replacement tube that doesn’t have to have the fixture re-wired to remove a Ballast and change tube receivers at each end of the fixture? How about a fixture that has Sylvania FP28/835/ECO tubes?

    Reply

  2. Hi I am working on a project at work in a nursing facility where I have 50 fixtures that require 2 bulbs (F54T5/830 ) I would like to replace them with an L.E.D equivalent not only for energy efficiency but mostly due to accessibility they are used to backlight a series of 50 stained glass patterns and are not very easy to remove to replace the current fluorescent bulbs I would like to know price and availability Please my name is Dave Jennings and I am the facilities manager for Jewish Senior Services in Fairfield CT my email is djennings@jseniors .org

    Reply

    • Hi Dave,

      Thanks for the message! You have a few different options for replacing those 54W HO T5 lamps. You can get Type A LED T5 lamps that work on your existing ballast or Type B LED T5 lamps that bypass the ballast and wire direct. Type A would be the easiest install but you have to make sure your existing ballasts are on the compatibility list – see below:

      http://ledt8bulb.com/pdf/SmartDriveLEDT5CompatibilityList.pdf

      The other option would be Type B LED T5 tubes from Keystone that bypass the ballast and wire direct. The initial install is a bit lengthier but with the ballast removed you have taken out one failure point as far as long-term maintenance is concerned.

      http://ledt8bulb.com/led-t5-tubes/type-b-bypass.html

      Give those options a look and if you have any questions just let us know! We can also provide you a volume pricing quote if you’d like (looks like you’d need 100 bulbs total).

      Reply

Leave a Comment